| Computer + power |
| Raspberry Pi 5, 4 GB | Raspberry Pi 5 4GB (SC1111). 2 GB sold out at PiShop; same speed, more headroom | 1 | $110.00 | PiShop.us | |
| Pi 5 Active Cooler | Raspberry Pi Active Cooler SC1148 | 1 | $12.95 | PiShop.us | |
| microSD card, 32 GB, High Endurance | SanDisk High Endurance 32GB | 1 | $22.99 | Amazon | |
| Samsung T7 SSD | Music library | 1 | have it | — | |
| Supercap UPS | Geekworm UPS_Scap_5V5A, 100F | 1 | $48.90 | Geekworm | |
| Internal 12 V power supply | Mean Well LRS-75-12, 12 V 6 A, 75 W, enclosed, UL listed, 99 × 97 × 30 mm | 1 | $14.10 | Digi-Key | |
| Locking mains inlet | Neutrik powerCON TRUE1 TOP NAC3MPX-TOP, 20 A UL498 | 1 | $7.33 | Digi-Key | Rear · Ø 24.0 + 2 × Ø 3.2 at 19 × 24 |
| powerCON TRUE1 power cord | BESCOOS 14 AWG, Edison 5-15P to TRUE1-compatible female (Seetronic SAC3FX), 5 ft | 1 | $24.99 | Amazon | |
| Mains fuse ×3 (1 fitted, 2 spares) | Littelfuse 0218002.MXP, 2 A time-lag, 5 × 20 mm, 250 V | 3 | $1.56 | Digi-Key | |
| In-line fuse holder (mains rated) | MPD BF303 (BF303-ND), 5 × 20 mm, 500 V 15 A, 16 AWG UL1015 600 V leads. Replaces the Littelfuse 150520, now obsolete. NOT an automotive holder | 1 | $2.38 | Digi-Key | |
| 12 → 5 V converter (screen + fans) | Pololu D36V28F5, 5 V 3.2 A, 5.3–50 V in, 17.8 × 20.3 mm | 1 | $23.95 | Pololu | Ordered 2 (order 1J605088), second is for the café 2U. |
| 12 V lead, power supply → UPS | 18 AWG 5.5 × 2.1 mm DC pigtail, 1 ft (3-pack) | 1 | $6.99 | Amazon | |
| Insulated push-ons for the inlet | Fully insulated nylon female spades, 22–16 AWG (100-pack) | 1 | have it | Amazon | |
| Insulated forks for the power supply | Baomain insulated fork terminals, #6 stud, 22–16 AWG (100-pack) | 1 | $6.59 | Amazon | |
| Mains wire + earth bond hardware | MECCANIXITY UL1015 600 V 18 AWG black, white, green; ANGSTROM #8 insulated rings; #8 internal-tooth washers; 1/16″ polycarbonate shield; shock-hazard labels. #8 screw + nut from Ace | 1 | $66.31 | Amazon | |
| Audio |
| HiFiBerry DAC2 ADC Pro | DAC + ADC HAT | 1 | $74.90 | HiFiBerry (direct) | |
| XLR male panel jack | Neutrik NC3MD-L-1 (6473-NC3MD-L-1-ND) | 2 | $5.74 | Digi-Key | Rear · D-size, Ø 24.0 + 4 × Ø 3.2 at 19 × 24 mm |
| RCA jack, red (isolated) | Neutrik NF2D-B-2, D-size | 1 | $9.08 | Digi-Key | Rear · D-size, Ø 24.0 + 4 × Ø 3.2 at 19 × 24 mm |
| RCA jack, white (isolated) | Neutrik NF2D-B-9, D-size | 1 | $9.08 | Digi-Key | Rear · D-size, Ø 24.0 + 4 × Ø 3.2 at 19 × 24 mm |
| Mute relay | Omron G5V-2-H1 DC5, 5 V DPDT | 1 | $4.12 | Digi-Key | |
| Relay diode | onsemi 1N4148 | 2 | $0.10 | Digi-Key | |
| Mute driver parts | 2N3904 transistor (200-pack), 1 kΩ + 100 kΩ from a 1/4 W resistor kit, ELEGOO perfboard kit | 1 | $29.97 | Amazon | |
| Shielded audio cable | Canare L-4E6S star quad, 5 ft. Short runs: relay → XLR jacks, RCA jacks → DAC input | 1 | $18.15 | Amazon | |
| Controls |
| POWER button | E-Switch PVA6RE241G1, 16 mm momentary, black anodized, red/green ring | 1 | $14.80 | Digi-Key | Front · keyed Ø 16.2 mm, flat 15.0 at the bottom |
| OUT MUTE switch | E-Switch PVA6LRE21111, 16 mm latching, black anodized, red ring | 1 | $16.98 | Digi-Key | Front · keyed Ø 16.2 mm, flat 15.55 at the bottom |
| Volume encoder (no detents) | Bourns PEC11R-4020F-S0024, 20 mm shaft (7 mm bushing for the 3.18 mm panel; trim shaft to suit knob) | 1 | $2.64 | Digi-Key | Front · Ø 7.5 mm (M7 × 0.75) |
| Browse encoder (24 clicks) | Bourns PEC11R-4220F-S0024, 20 mm shaft (7 mm bushing for the 3.18 mm panel; trim shaft to suit knob) | 1 | $2.69 | Digi-Key | Front · Ø 7.5 mm (M7 × 0.75) |
| Damping grease | Nyogel 767A, 50 g | 1 | $25.99 | Amazon | |
| Knobs | Kilo International OEJNI-90-4-7: black matte aluminium, diamond knurl, flat face, no skirt, 23.5 × 15.9 mm, 6 mm | 2 | $12.93 | Digi-Key | Clearance: Ø 24 mm |
| GPIO stacking header | Geekworm 2x20 stacking header kit | 1 | $9.90 | Amazon | |
| M2.5 standoffs + screws | iUniker 134-piece brass M2.5 kit for Raspberry Pi | 1 | $9.99 | Amazon | |
| Screen |
| 8.8″ DSI touchscreen | Waveshare 8.8inch DSI LCD, 480 × 1920 | 1 | $77.99 | Amazon | Front · 222 × 58 mm window, R1 |
| Pi 5 display ribbon | Raspberry Pi display cable for Pi 5, 300 mm | 1 | $2.65 | PiShop.us | |
| Wireless |
| Wi-Fi adapter | Alfa AWUS036ACM (two RP-SMA antennas included) | 1 | $46.97 | Rokland | |
| Bluetooth adapter | Sena UD100-G03, RP-SMA antenna, Linux-friendly | 1 | $41.31 | Amazon | |
| Antenna cables, 12″ (2-pack) | Bingfu RP-SMA male to female bulkhead, RG316, 30 cm. Both Wi-Fi antennas (they sit 372 mm apart) | 1 | $6.99 | Amazon | Rear · Ø 6.5 mm each |
| Antenna cables, 6″ (2-pack) | Bingfu RP-SMA male to female bulkhead, RG316, 15 cm. Bluetooth antenna + a spare | 1 | $6.99 | Amazon | Rear · Ø 6.5 mm |
| Network + USB |
| LAN feedthrough | Neutrik NE8FDP etherCON | 1 | $17.10 | Digi-Key | Rear · D-size, Ø 24.0 + 4 × Ø 3.2 at 19 × 24 mm |
| USB-A feedthrough | Neutrik NAUSB-W | 1 | $10.68 | Digi-Key | Rear · D-size, Ø 24.0 + 4 × Ø 3.2 at 19 × 24 mm |
| Internal USB cable | StarTech 1 ft USB-A to USB-B (Pi → back of the Neutrik USB jack) | 1 | $4.95 | Amazon | |
| Short USB extensions ×2 | C2G 6 in USB-A extension, for the Wi-Fi and Bluetooth sticks | 2 | $2.95 | Amazon | |
| Short Ethernet patch | Cable Matters Cat6, 1 ft (Pi → etherCON) | 1 | $6.29 | Amazon | |
| Case + cooling |
| 2U rack case | Hammond RM2U1908SBK | 1 | have it | — | |
| Rack ear screws | #10-32 × 3/8″ flat head (countersunk), included with the Hammond case | 4 | have it | — | |
| Plate hardware | Glarks M3/M4/M5 stainless countersunk kit (M3 × 5 flat heads); M3 × 8 pan heads from the M3 standoff kit | 1 | $15.99 | Amazon | |
| Tools (one-time) | M2.5 tap + 2.1 mm drill, M3 tap + 2.5 mm drill, 3.4 mm cobalt drills, 90° countersink set, Bosch T-handle tap wrench | 1 | $53.97 | Amazon | |
| Exhaust fans | Noctua NF-A4x10 5V, 40 mm | 2 | $15.95 | Amazon | Rear · Ø 38 mm opening + 4 × Ø 3.4 mm at 32 × 32 mm |
| Fan grills | Noctua NA-FG1-4 Sx2 (pair) | 1 | $12.95 | Amazon | Uses the fan screw holes |
| M3 standoff kit | 640-pc M3 brass + nylon hex standoffs, screws and nuts | 1 | $18.99 | Amazon | |
| Lock hardware | M3 nylon-insert lock nuts (200), Loctite 243 (metal threads only) | 1 | $17.89 | Amazon | |
| Cable tie bases | XHF screw-mount saddle bases + 8″ ties (no stick-on bases, they let go in heat) | 1 | $9.99 | Amazon | |
| Internal mounting plate | 3 mm 5052 aluminium plate, laser cut with all mounting holes | 1 | — | Quote pending | |
| Screen bracket | 3 mm 5052 L-bracket, laser cut + bent 90°, cut with the plate. Holds the screen against the front panel | 1 | — | Quote pending | |
| Screen mounting bits | 4 × M3 × 15 male-female standoffs (from the M3 kit) + uxcell 5 mm × 1 mm black foam tape for the window gasket | 1 | $5.79 | Amazon | |
| Low-voltage wiring | JST-XH kit with pre-crimped leads; hook-up wire and heat-shrink on hand | 1 | $16.99 | Amazon | |
| Panels |
| Panel cutting | Front and rear panels machined to the cut-only drawings; engraving later, once the build is fully tested | 1 | — | Quote pending | |
| Shipping |
| Shipping | Digi-Key $8.49 + about $13 tariff, HiFiBerry $39, Pololu, others estimated | 1 | ≈ $85 | — | |